Fully Refurbished 2020 Bizerba GSP HDW Meat & Cheese Slicer with Portion Scale

  
Deli - Bakery - Restaurant. 2020 Bizerba GSP HDW Slicer. Low profile that reduces operator fatigue. Features wide product carriage for increased capacity. A 306-point remnant holder secures your product in place. No seams and large radius. 3 1/2 thick thumb guard for increased protection.

Unique design allows for small end pieces, increasing yield. Produces clean and consistent slices. Chromium-coated blade with 60-62 Rockwell hardness at the edge.

This blade is the hardest, thinnest, largest, and straightest blade in the industry. All of our Bizerba slicers haves an ergonomic, 40 degree inclined carriage design, allowing the slicer to be used for heavy products. They have a large distance between blade and motor tower for ease of cleaning. The machine surface of our Bizerba's are closed and without corners or edges, this gives the juices from meat and the sliced products a targeted direction to move toward for easy cleaning. The blade covers are easily and simply mounted by means of a quick lock system, and lastly the Bizerba motors are powerful enough to allow for slicing of almost any product without issue.

This slicer comes with the option to be manual or fully automatic, with varying stroke width and speed settings. You can set your product in, adjust the depth of the cut with the proper stroke and speed and walk away as the slicer does then work for you.

The portion scale works in conjunction with the automatic setting, allowing you to either set the amount of slices you want to cut or to slice at your desired depth until a certain weight is achieved. This automatic slicer also comes with the 25 degree carriage and 90mm product shield option, this option gives the most precision on the carriage should you want your slices to be small and precise. All of our Bizerba slicers have gone through our step-by-step refurbishment process, see below for more details.

This specific slicer needed the load arm replaced due to a seized set screw and the pivoting shaft of the carriage reset, once that was resolved the gauge plate & adjustment knob was calibrated for proper slicing thickness. The weighing mechanism was tested and found to be fully functioning, then cleaned under and on the surface. Lastly, the meat grip was cleaned and lubricated to allow for it's full range of motion.

This slicer has a brand new blade cover and meat grip installed. The electrical cord was taped for protection purposes. All of our Bizerba slicers have gone through a complete top to bottom cleaning process. The entire undercarriage is cleaned including all of its plastic covers and re-lubricated with original Bizerba oil and food-safe petroleum grease.

The aluminum exterior has been thoroughly de-greased and polished to bring back as much of its original shine as possible. The blades have also been cleaned and polished as well. The cosmetic condition of this slicer is in great condition, there are some scratches and wear marks on the surface but is overall limited. The weighing platter is in more of a satisfactory condition, and includes more scratches than the rest of the slicer.

The side of the slicer where the sliding carriage meets the body has some scratching due to grinding before we fixed the issue. All of our Bizerba slicers have been. And have been thoroughly tested to be. This slicer went through a 112-point inspection to ensure all components are in good condition or replaced to meet our.

All electrical components were checked to be in proper working condition, we ensure you this slicer is fully functional and operational. Without needing servicing or parts. Blade has a MINIMUM of 66% of its lifespan left. All slicer blades have been. Sharpened by Bizerba's recommended procedure, twice. The gauge plate was checked for accurate calibration to the control knob. Whatever product you are cutting will be. Within 0.5mm of the thickness indicated on the control knob. The gauge plate was also. Properly aligned on its X, Y, and Z axis. We ensure all parts are correctly oriented and properly secured. We check all slicers to ensure every part is in proper working condition. We will not sell you a used product, we will sell you a. All re-sellers of these slicers receive these slicers via liquidation. We stand out from our competition by thoroughly. Refurbishing these slicers and renewing them to another life for your needs. We stand behind our products and can guarantee you will be satisfied with our refurbished commercial kitchen equipment.

We stand behind our work. If you encounter any issues with the equipment we sell you, we promise to repair or replace it.

Your slicer will not arrive shrink-wrapped to a pallet, it will be fully enclosed and secured with foam. Please see the last photo of this listing for more information. This item is in the category "Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Food Preparation Equipment\Commercial Meat Processing Equipment\Meat Cutters & Slicers".

The seller is "baap_commercial_equipment" and is located in this country: US. This item can be shipped to United States.

1. Brand: Bizerba
2. Power Type: Electric
3. Horsepower: 1/2 hp
4. Model: GSP HDW
5. Blade Size: 13 in
6. Country/Region of Manufacture: Germany